DRIVER INSTALLATION
52
2. Start the system and then press Tab+F6 to enter the Mc-
BIOS manager utility. Use the conguration utility to create the
RAID set and volume set. For details, see Chapter 3, McBIOS
RAID Manager. Once a volume set is created and congured,
continue with installation of the driver.
3. Re-Boot Windows and the OS will recognize the SATA RAID
controller and launch the “Found New Hardware Wizard”, which
guides you in installing the SATA RAID driver.
4. The “Upgrade Device Driver Wizard” will pop-up and provide a
choice of how to proceed. Choose “Display a list of known driv-
ers for this device, so that you can choose a specic driver.” and
click on “Next”.
5. When the next screen queries the user about utilizing the cur-
rently installed driver, click on the “Have Disk”button.
6. When the “Install From Disk” dialog appears, insert the SATA
RAID controller driver diskette or the shipping software suite CD
and type-in or browse to the correct path for the “Copy manu-
facturer’s les from:” dialog box.
7. After specifying the driver location, the previous dialog box
will appear showing the selected driver to be installed. Click the
“Next” button.
8. The “Digital Signature Not Found” screen will appear. Click on
“Yes” to continue the installation.
9. Windows automatically copies the appropriate driver les and
rebuilds its driver database.
10. The “Found New Hardware Wizard” summary screen ap-
pears; click the “Finish” button.
11. The “System Settings Change” dialog box appears. Remove
the diskette from the drive and click Yes option to restart the
computer to load the new drivers.
12. See Chapter 5 in this manual for information on customizing
your RAID volumes using McRAID storage manager.
To Next Page
Loading...
