Areca ARC-1200 - Page 63

63
ARCHTTP PROXY SERVER INSTALLATION
• General Conguration
Binding IP 0.0.0.0: You can choose either local administration or
remote administration to connect web browser.
Binding IP 127.0.0.1: Using local administration to connect web
browser.
Binding IP 192.166.0.44: Using remote administration to connect
web browser.
HTTP Port#: Value 1~65535
Display HTTP Connection Information To Console: Select “Yes’ to
show Http send bytes and receive bytes information in the console.
Scanning PCI Device: Select “Yes” for ARC-1XXX series adapter
Scanning RS-232 Device: No
Scanning Inband Device: No
• Mail Conguration
When you open the mail conguration page, you will see following
settings:
SMTP server IP Address: Enter the SMTP server IP address which is
not MCRAID storage manager IP. Ex: 192.168.0.2
Sender Name: Enter the sender name that will be shown in the
outgoing mail. Ex: RaidController_1
Mail address: Enter the sender email that will be shown in the out-
going mail, but don’t type IP to replace domain name.
Ex: RaidController_1@areca.com.tw
Account: Enter the valid account if your SMTP mail server need au-
thentication.
Password: Enter the valid password if your SMTP mail server need
authentication.
MailTo Name: Enter the alert receiver name that will be shown in
the outgoing mail.
Mail Address: Enter the alert receiver mail address.
Ex: admin@areca.com.tw