APPENDIX
86
1. To upgrade the RAID controller rmware, move the mouse
cursor to “Upgrade Firmware” link. The “Upgrade The RAID System
Firmware” screen appears.
2. Click "Browser". Look in the location to which the rmware
upgrade software was downloaded. Select the le name and click
“Open”.
All les (BIOS, BOOT, FIRM and MBR0) can be updated
through this function.
3. Click “Conrm The Operation” and press the “Submit” button.
4. The web browser begins to download the rmware binary to the
controller and start to update the ash ROM.
5. After the rmware upgrade is completed, a bar indicator will
show “Firmware Has Been Updated Successfully”
6. After the new rmware has completed downloading, nd a
chance to restart the controller/computer for the new rmware to
take effect.
The web browser-based McRAID storage manager can be accessed
through the In-Band PCIe bus. The In-Band method uses the
ArcHttp proxy server to launch the McRAID storage manager.
The IP address can reference to chapter 5 Archttp Proxy Server
Installation.
From a remote pc, you can directly open a web browser and enter
the IP address. Then enter user name and password to login and
start your management. You can nd the rmware update feature
in the browser console: "System Controls".
To Next Page
Loading...
