Training manual ALTEAS & GENUS ONE
Page. 83 of 88
9.3.7 Menù 8 : Service parameters
Diverter valve cycles No.(n x 10)
Time of circulator on (h x 10)
Boiler circulator cycles No.
(n x 10)
Boiler Life Time (h x 10)
CH flame detection (n x 10)
DHW flame detection (n x 10)
Hours burner on in heating (h x
10)
Hours burner on in sanitary (h x
10)
Number of flam lifts
(n x 10)
Number of ignition cycles
(n x 10)
Average heat request duration
0: Off ; 1: On (only visualization)
Ventilator speed X 100 (only
visualization)
Pump state (for 2 step pump)
0= off; 1= low speed; 2= high speed
(only visualization)
0= sanitary; 1= haeting ((only
visualization)
Temperature set on heating (°C)
Temperature measured on
heating delivery (°C)
Heating return measured
temperature (°C)
Sanitary measured temperature
(°C)
External temperature (°C)
STORAGE AND SOLAR (if present)
Storage measured temperature
(°C)
Sanitary inlet temperature (°C)
Month to next maintenance