ARM Cortex-M3 DesignStart User Manual

Chapter 6
FPGA build
This chapter describes the steps that are required to build an FPGA bit file from the supplied source
code.
It contains the following sections:
• 6.1 Build flow on page 6-50.
• 6.2 Build requirements on page 6-52.
ARM 100896_0000_00_en Copyright © 2017 ARM Limited or its affiliates. All rights reserved. 6-49
Non-Confidential

ARM Cortex-M3 DesignStart Specifications

General

Brand	ARM
Model	Cortex-M3 DesignStart
Category	Motherboard
Language	English