Arris DCX3520e-M - Connecting an A;V Receiver - Audio

Installation
High
-Definition DVR DCX3520e-M • Installation Manual
16
365
-095-25080-x.1
Connecting an A/V Receiver — Audio
There are several options available for audio connections to the A/V receiver:
• Digital audio (OPTICAL S/PDIF)
• Stereo audio (AUDIO L and R)
If the A/V receiver supports it, the optical S/PDIF digital audio output may be used in place of the stereo
audio outputs (audio L and R). These outputs offer a higher level of audio quality, including support for
Dolby Digital audio.
• Digital audio optical (S/PDIF)—Connect the optical cable to the digital audio OPTICAL connector
on the DCX set-top and the optical connector on the A/V receiver.
• Stereo audio—Connect the stereo audio cable to the AUDIO L and R connectors on the DCX set-
top and the AUDIO L and AUDIO R connectors on the A/V receiver.
For information on configuring the DCX set-top settings, see Configuring the User Settings.