Arris DCX3520e-M - Table 24: Interactive Status Diagnostic Field Descriptions

Diagnostics
High
-Definition DVR DCX3520e-M • Installation Manual
79
365
-095-25080-x.1
Table 24: Interactive Status Diagnostic Field Descriptions
Field Description
IP Address
The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC 1500 to the
DCX3520e-M. 0.0.0.0 is displayed if the IP address is not configured or unknown.
UPM
The upstream modem address value is the same as the terminal ID assigned by the DAC 6000. It is
a unique, system-generated, eight-digit integer between 1 and 16777215. 00000000 is displayed
when the UPM is not configured or if it is unknown.
Upstream ID
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCX3520e-M. 0000
is displayed if the Upstream ID is not configured or if it is unknown.
Downstream ID
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCX3520e-M. 0000
is displayed if the Downstream ID is not configured or if it is unknown.
State
The interactive status of the DCX3520e-M:
Front Panel OSD Description
U UNCONFIG The DCX3520e-M is not configured for the
interactive system, and the platform should
run as pre-interactive.
C MAC_CONNECT The DCX3520e-M is waiting to establish a
connection to the MAC PID Stream.
Front Panel OSD Description
I dc INIT_WAIT_DC_OR_C The DCX3520e-M is in the interactive
initialization state and waiting for the default
configuration or the contention channel list
messages.
I L WAIT_LM_ACK The DCX3520e-M is in the interactive
initialization state and waiting for Link
Management Response ACK for Local
Address Message.
I SO WAIT_SO_ACK The DCX3520e-M is in the interactive
initialization state and waiting for a Sign On
acknowledgement.
I LA WAIT_LA_OR_SO The DCX3520e-M is in the interactive
initialization state and waiting for Logical
Address or Sign On with verification
Frequency message.
S I INIT_STOPPED The DCX3520e-M is in the interactive
initialization state and the TransMode has
stopped.