Arris DCX3520e-M - Table 21: Dvr;Hard Drive Status Diagnostic Field Descriptions

Diagnostics
High
-Definition DVR DCX3520e-M • Installation Manual
72
365
-095-25080-x.1
Table 21: DVR/Hard Drive Status Diagnostic Field Descriptions
Field
Description
Enabled
Indicates whether the DVR is enabled, based on the DCX3520e-M Connected State (CONNECTED or
DISCONNECTED) and resource availability (resource authorized; hard disk installed and functional):
OSD Front panel Description
True En DVR enabled
Front Panel OSD Description
False Un DVR disabled
Stream Indexer
Ver.
The stream indexer version number, without leading zeros; for example, version 0000000065 is
displayed as 65.
Content Record
Ver.
The content record version number, displayed without leading zeros.
Encoder
Encoder Not Installed
Number
Encoder Not Installed
Type
Encoder Not Installed
Quality
Encoder Not Installed
Drive
The drive type — IDE or NOT
AVAILABLE (neither enabled
nor configured).
Record Capacity
Remaining
The remaining recording
capacity, in bytes.
Number of
Installed Drives
The number of internal and external hard drives, up to a maximum of 9.
Drive
The identification number sequentially assigned to each installed drive and whether the drive is
Internal or External.
Model Number
The drive model number assigned at the factory.
Device ID
A text string of up to 20 characters that identifies the disk drive; N/A is displayed if the value is invalid
or cannot be retrieved.
Type
The drive type — IDE, USB, or Unknown.
Total Size
The drive size in decimal GB. (1 decimal GB = 1 x 109 bytes. For example, 120 decimal GB = 120 x 109
bytes.)
System, GPFS,
DVR Content, and
DVR Index
The space used and allocated in MB for each of the internal hard drive’s partitions — System, GPFS,
DVR Content, and DVR Index (1 binary MB = 220 bytes). N/A displays if the value is invalid or cannot be
retrieved.