Configuring the User Settings
-Definition DVR DCX3520e-M • Installation Manual
-095-25080-x.1
User Settings Menu Main Screen
To configure the DCX3520e-M settings on the main User Settings menu screen, first power off the
DCX3520e-M using either the remote control or the Power button and then press the MENU key on the
remote control. If the TV is on, the on-screen User Settings menu lists the DCX3520e-M settings that can
be adjusted.
If no HDMI device is connected to the DCX3520e-M, the default User Settings menu appears as follows:
Figure 12: Default User Settings Menu—No HDMI Connection
If the DCX3520e-M is connected via HDMI to a display device such as a television, the default User
Settings menu is updated to reflect this information. The YPbPr Output menu option is replaced with
the HDMI/YPbPr Output menu option as follows.
To Next Page
Loading...
