Installation
-Definition DVR DCX3520e-M • Installation Manual
-095-25080-x.1
Connecting an A/V Receiver, SDTV, and VCR
1. Connect a stereo audio cable to the AUDIO OUT L/R connectors on the DCX3520e-M series set-top
and the INPUT L/R connectors on the A/V receiver.
2. Connect a composite video cable to the composite video out connector on the DCX3520e-M series
set-top and the composite video connector on the A/V receiver.
3. Connect a stereo audio cable to the VCR AUDIO OUT L/R connectors on the A/V receiver and the
INPUT AUDIO L/R connectors on the stereo VCR.
4. Connect a stereo audio cable to the OUTPUT AUDIO OUT L/R connectors on the stereo VCR and the
VCR AUDIO IN L/R connectors on the A/V receiver.
5. Connect a composite video cable to the input video connector on the stereo VCR and the video
VCR OUT connector on the A/V receiver.
6. Connect a composite video cable to the output video connector on the stereo VCR and the video
VCR IN connector on the A/V receiver.
7. Connect a Composite Video cable to the input Composite Video connector on the Standard-
Definition TV (SDTV) and the TV/monitor output Composite Video connector on the A/V receiver.
8. Note: The digital audio optical (OPTICAL S/PDIF) output may be used in place of the stereo audio
outputs (AUDIO L/R). Optical S/PDIF offers a higher level of audio quality, including support for
Dolby Digital audio.
Note: These video connection methods do not support HD video. If there is an HDTV, see Connecting an HDTV
— Separate Video/Audio Connections.
To Next Page
Loading...
