Diagnostics
-Definition DVR DCX3520e-M • Installation Manual
-095-25080-x.1
Field Description
r dc RUN_WAIT_DC_OR_C The DCX3520e-M is in the interactive state
and waiting for the default configuration or
the contention channel list messages.
r RUNNING Interactive state is running, sending idle
messages, and waiting for any prepare for
poll or MAC messages.
S RUN_STOPPED The interactive run state has stopped and
DCX3520e-M is waiting for status or a
transmission control message.
00 INVALID The interactive state is unknown or invalid.
MAC Abort Cntr
This counter increments every time the MAC layer reaches the cell abort count limit. It is reset by
the successful upstream transmission of a cell: for example, when the DCX3520e-M receives an
ACK. If the counter reaches the MAC abort count limit, the DCX3520e-M assumes the MAC layer is
unavailable due to noise, congestion, or some other problem. The DCX3520e-M stops
transmitting data upstream, reports an error to the calling function, and attempts to re-enter the
network using the initialization process. 0000 is displayed as the default or the MAC Abort CNTR is
unconfigured or unknown.
Socket Port State
The socket mode and activity:
• UNUSED — The socket is not being used.
• OPENED — The socket is open.
• READY — The socket is ready to send or receive.
• RECEIVING — The socket is receiving data from the application server.
• SENDING — The socket is sending data to the application server.
• UNKNOWN — The socket state is invalid or unknown.
To Next Page
Loading...
