Arris DCX3520e-M - Page 76

Diagnostics
High
-Definition DVR DCX3520e-M • Installation Manual
66
365
-095-25080-x.1
Field Description
LFE: Low Frequency
Effect
The LFE indicates if the nomenclature low frequency effects are available in the Dolby Digital audio
stream, as indicated if the “0.1” is present in the Dolby Digital 5.1 nomenclature (for example, “Dolby
Digital 5.1 surround”). Valid values include:
OSD Display Description
0 LFE is not available
1 LFE is available (i.e. “Dolby Digital 5.1 surround”).
Dolby Volume
Indicates if Dolby Volume is turned on or off
Audio / Video Mute
The Audio and Video Mute Status indicates if the audio and/or video have been muted by the
software. The audio mute is either On or Off. The Video Mute describes the MPEG muting method
selected by the software and indicates if the output video is in the mute state by displaying On or
Off, followed by the mute method. Methods include:
OSD Display Description
UNMUTED Displayed if the mute method is not selected.
MUTE to STILL Displayed if the mute method includes stopping video and presenting a
still frame, similar to a pause function.
MUTE to BLACK Displayed if mute method presents a black screen.
Captions
The captions mode displays captions present on the service.
Note: The caption options are set via the User Setting Menu, where the subscriber can enable closed
captions and select options.
1
st
Caption Row: Caption Detected:
OSD Display Description
708 EIA-708 captions detected.
608 EIA-608 captions detected.
608 and 708 Both EIA-608 and EIA-708 captions detected.
None No captions detected.
2
nd
Caption Row: Caption Options Set, followed by Service Selected:
OSD Display Description
708 Set EIA-708 captions enabled, with options set by user.
708 Default EIA-708 captions enabled, with no options set by user.
608 Set EIA-608 captions enabled, with options set by user.
608 Default EIA-608 captions enabled, with no options set by user.
None Set Captions detected but not enabled.