6.7.1. Effects Presets
All effects in AstroLab have presets, not to be confused with AstroLab’s individual sound
Presets. These let you select a quick combination of settings to get “most wanted” sounds
from the effects right away.
To audition these Effects Presets, long-press the On/Off button of the desired slot and use
the Encoder wheel to browse the effects.
♪ Since reaching the Effects presets menu is only a button-press away, you can easily enhance a
live performance by adding an unexpected Effect. Then and add dimension to your solo by turning the
Effects knob in the upper right of the panel.
6.8. Tempo Sync
Some time-based effects sync to AstroLab’s tempo if their
Sync
parameter is engaged. Find
out more about sync in the Settings chapter.
6.9. Master EQ
The final link in AstroLab’s signal chain is a 3-band master EQ. (This is separate from the
Equalizer option in the Insert FX.) It can be ideal for sculpting your tone to a particular room
you’re playing a gig in, not stepping on the bass player,
being
the bass player, and much
more. Hold Shift and then turn one of these three Macro knobs to adjust the corresponding
band:
• Timbre: Bass
• Time: Midrange
• Movement: Treble
The boost/cut range of each band is -10 to +10 dB.
6.10. Supplement: Tables
These tables list all parameters, and what they do, for all of AstroLab’s Insert FX as well as
Delay and Reverb types.
The best way to learn the pedal-style Insert Effects is simply to experiment and play with
them. However, for reference, here is a complete list of the effects and their individual
parameters.
♪ For each of the FX, the parameter changed when you turn the Intensity [p.13] knob is listed in bold.
♪ Each Effect menu starts with an Enable On/Off switch at the top.
38 Arturia - User Manual AstroLab - EFFECTS
To Next Page
Loading...
