ASCOM d41 User Manual

TD 92582GB
2009-12-15/ Ver. C
User Manual
Ascom d41 DECT Handset
21
6 Calling
6.1 Incoming Call
The flashing LED, accompanied by a ring signal and/or a vibrating handset, give you notice
of a call. Ring signal and vibrator can be disabled. The calling party’s handset number or
name is shown. The name will be shown if the calling party’s handset number is stored in
the local phonebook or if calling line information is available. Press the Off-hook key to
answer the call. When a headset is connected to the handset, the answering button on
the headset can be used to answer the call.
Other answering methods can also be set in the Settings menu, see 9.3 Settings on page
33. The answering methods are; "Automatically" and "Loudspeaking".
When “Automatically” is enabled, all incoming calls will be connected automatically.
6.1.1 Answer a Call
When the signal sounds press to answer the call, or press the soft key to answer
the call in loudspeaking mode. The name/number of the calling party is displayed if calling
line information is available.
6.1.2 End a Call
Press to end the call. The duration of the call is shown in the display. The total time of
the call can also be retrieved from the Calls menu > Call time.
6.2 Outgoing Call
6.2.1 Pre-Dial
1 Enter the number.
2 Press or "Call" to get the line. The number is shown on the display while
dialling.
If needed, press "Clear" to erase the number. By using the Navigation key it is possible to
step and add/delete a digit in the middle of a number. It is possible to turn on the tone
sender in a pre-dialled number by making a long press on .
6.2.2 Dial a Number from the Call list
1 Press when in idle mode; or press "Menu", select "Calls" and then select "Call
list".
2 Select a number.
3 Press or "Call" to dial. The number can be edited before the call is started.
Press "More" and select "Edit number".
6.2.3 Dial a Number from the Local Phonebook
1 Press the "Menu" Soft key.
2 Select "Contacts".
3 Select "Call contact".

ASCOM d41 Specifications

General

Type	DECT telephone
Answering machine	No
Mounting type	-
Product color	Gray
Speakerphone	Yes
Phonebook capacity	500 entries
Languages support	CZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, NOR, POL, POR, RUS, SLK, SWE, TUR
Standby time	180 h
Battery recharge time	4 h
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Number of handsets included	1

Weight and Dimensions

Depth	24 mm
Width	53 mm
Height	133 mm