TD 92582GB
2009-12-15/ Ver. C
User Manual
Ascom d41 DECT Handset
38
2 Select “No action”.
9.3.10 System
Change System
Select “Automatic” or a specific system. If the handset is set to “Automatic” it selects a
system according to the priority list, see Priority on page 39.
Subscribe System
The handset can subscribe up to eight different systems. To subscribe a new system, the
“Park:” (Portable Access Right Key) and “Ac:” (Authentication code) related to the system
that will be log on to are needed. Contact your system administrator for more
information.
Note: The PARK code may not be needed if there is no alien DECT system within the
coverage area.
The IPEI code is a unique code which has been assigned to the handset, see also 10.1
Admin Menu on page 40.
1 Enter System name. Press "next".
2 Enter PARK code. The PARK code may not be needed if there is no alien DECT
system within the coverage area.
3 Enter AC code. Press "Next".
An information text "Protection on?" is displayed.
4 Select "Yes" if the new system needs to be protected. It is not possible to delete a
protected subscription from the System menu
1
.
5 Press "OK". A searching mode starts.
Unsubscribe System
1 Select "Unsubscribe"
1
.
2 Select the system to unsubscribe in the list.
3 Press "Select".
4 Press "Yes" to unsubscribe the system. Otherwise, press "No".
Rename System
It is possible to change the name of the system in the handset.
1 Select "Rename System".
2 Select system to rename.
3 Press "Edit"
4 Enter new name.
5 Select "Save".
1. It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the
Admin menu or the DECT system.