EasyManuals Logo

ASCOM d41 User Manual

ASCOM d41
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
TD 92582GB
2009-12-15/ Ver. C
User Manual
Ascom d41 DECT Handset
14
Hinge-type clip (standard)
The clip on the back of the handset is used to fasten the handset to a belt or similar. It
is also possible to change the clip to a swivel-type.
Swivel-type clip
The ordinary belt clip can be replaced with a special swivel-type belt clip adapted to
firmly place your handset onto your belt.
3.5.2 Security Cord
The security cord is 800 mm long. The security cord is attached directly to the handset.
3.5.3 Leather Casing
The leather casing is especially designed for the handset. The casing comes with a swivel
type belt clip and the handset is fully operational while placed in the casing.
3.5.4 Headset
A headset is recommended if the handset is frequently used, and/or the user want to have
both hands free. The headset comes in two versions; microphone integrated in the cable
and microphone on a boom.
In order to achieve optimal audio quality with the different headset types it is
recommended to select the corresponding headset profile.
The default setting is microphone on a boom, that is, the audio is optimized for using a
headset with microphone on a boom. The headset profile can be changed in the menu by
do as follows:
1 Enter the menu by pressing the “Menu” soft key.
2 Select "Settings".
3 Press "Select".
4 Select "Headset".
5 Select the corresponding headset profile from list, that is, "Mic on boom" or "Mic
on cable".
6 Press "Select".
If the preconfigured headset profiles do not match the headset in use, or the audio
performance is bad, it is possible to configure an own headset profile. This is done in the
PDM, see Configuration Manual, Ascom d41 DECT Handset, TD 92641GB. If an own
profile is configured in the PDM, it will be selectable in the handset menu.

Table of Contents

Other manuals for ASCOM d41

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASCOM d41 and is the answer not in the manual?

ASCOM d41 Specifications

General IconGeneral
TypeDECT telephone
Answering machineNo
Mounting type-
Product colorGray
SpeakerphoneYes
Phonebook capacity500 entries
Languages supportCZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, HUN, ITA, NOR, POL, POR, RUS, SLK, SWE, TUR
Standby time180 h
Battery recharge time4 h
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Number of handsets included1
Weight and Dimensions IconWeight and Dimensions
Depth24 mm
Width53 mm
Height133 mm

Related product manuals