TD 92582GB
2009-12-15/ Ver. C
User Manual
Ascom d41 DECT Handset
25
2 Select "Conference call"
1
.
3 Press "Select".
The person initiating the conference call is the conference leader, and the other are
participant members of the conference call.
6.3.10 Call Back
When a call is made to a busy handset, it is possible to automatically call back when the
busy handset is free. When a busy tone louds, do as follows:
1 Press the "More" soft key during the call.
2 Select "Call back"
1
.
3 Press "Select".
4 Press and wait until the handset alerts.
5 When the handset alerts, press and the call will automatically be started.
6.3.11 Call Waiting
During a call when the line is busy, do as follows:
1 Press the "More" soft key.
2 Select "Call waiting"
1
.
3 Press "Select". The other part will get a "Call waiting" signal.
When the line is free it will automatically call the number again. This is system dependent.
6.3.12 DTMF
1 Press the "More" soft key during the call.
2 Select "DTMF".
3 Press "Select". This will enable the use of Dual Tone Multi Frequency (DTMF)
signals.
6.3.13 DECT Info
This option is only visible if the Admin menu is activated. See Configuration Manual,
Ascom d41 DECT Handset, TD 92641GB for more information.
6.4 Loudspeaking Function
How to activate the loudspeaking function is dependent of the choice of answering
method. An incoming call can be connected with loudspeaking function active by pressing
left soft key. During a call, a press on the left soft key activates the loudspeaking function.
Press the left soft key again to turn it off.
6.5 Call Diversion
All calls; internal calls, external calls, calls when busy, or calls at no answer can be diverted
to another handset number. The diversion is made via the Calls menu > Call services >
Divert calls. See Divert Calls on page 31.
1. Only visible if defined in PDM.