ASCOM d41 - Contacts

TD 92582GB
2009-12-15/ Ver. C
User Manual
Ascom d41 DECT Handset
31
Deactivate the Absence Setting
1 Enter “Call service” in the menu.
2 Select “Deactivate”.
3 Press "Select".
Divert Calls
The user can divert calls to another extension by selecting "Divert calls".
Divert Internal/External Calls
1 Select "Internal" and/or "External".
2 Select "Activate".
3 Enter number (maximum 24 digits) to divert to, or press to access the
phonebook.
4Press "OK".
The handset sends a diversion reason code
1
to the system by establishing a call. The call
will automatically be disconnected after a few seconds.
To stop diversion, select Internal > Deactivate, and/or select External > Deactivate. In both
cases, confirm by pressing "OK".
Divert Calls if No Reply
1 Select "No reply".
2 Select "Activate" and press the "OK".
3 Enter number (maximum 24 digits) to divert to, or press to access the
phonebook.
4Press "OK".
The handset sends a diversion reason code
1
to the system by establishing a call. The call
will automatically be disconnected after a few seconds.
To stop diversion, select No reply > Deactivate, and confirm by pressing "OK".
Divert Calls When Busy
1 Select "When busy".
2 Select "Activate" and press "OK".
3 Enter number (maximum 24 digits) to divert to, or press to access the
phonebook.
4Press "OK".
The handset sends a diversion reason code
1
to the system by establishing a call. The call
will automatically be disconnected after a few seconds.
To stop diversion, select When busy > Deactivate, and confirm by pressing "OK".
9.2 Contacts
1 Enter the menu by pressing the “Menu” soft key.
1.The code is defined when configuring the absence/diversion reason in the PDM/IMS2.