ASCOM d41 - Answering

TD 92582GB
2009-12-15/ Ver. C
User Manual
Ascom d41 DECT Handset
36
1 Select “Locks”.
2 Select “Auto phone lock”.
3 Select “On”, or "On in charger".
4 Enter PIN code
5 Press "OK".
If the PIN code is forgotten it can be removed by your distributor.
Deactivate the Phone Lock
1 Select “Locks”.
2 Select “Auto phone lock”.
3 Select “Off”.
4 Enter PIN code
5 Press "OK".
Change PIN Code
1 Select "Change PIN code".
2 Enter the old PIN code.
3Press "OK".
4 Enter new PIN code twice.
5 Press "Save".
9.3.6 Answering
The default setting for the handset is to use the Off-hook key when answering a call. The
answering behaviour can be configured to answer the call automatically, i.e. without
pressing a key, and/or in loudspeaking mode. It is also possible to set the answering
behaviour to any key. If "Any key" is selected, any keys except the "On-hook" key and the
"Sound off" key can be used to answer a call.
Answering Key
The answering key is by default set to Hook-off.
1 Select "Answering".
2 Select "Answering key".
3 Select "Hook-off" or "Any key".
4 Press "Back" to save the setting.
Answering Behaviour
1 Select "Answering".
2 Select "Answer behaviour".
3 Select "Automatically" and/or "Loudspeaking".
4 Press "Change" to change the setting. The check box will be marked.
5 Press "Back" to save the setting. To remove the setting, press "Change". The check
box will be unmarked.