TD 92582GB
2009-12-15/ Ver. C
User Manual
Ascom d41 DECT Handset
35
9.3.4 Time & Date Settings
Set Time Format
1 Select "Time & Date"
2 Press "Select".
3 Select time format. The actual time format will be displayed. Selectable time
formats:
• hh:mm (am/pm) (for example: 1:00pm)
• hh:mm (for example 13:00)
4 Press "Select" to save the setting.
Set Date Format
1 Select “Time & Date”.
2 Press "Select".
3 Select “Date format”
4 Press "Select". Selectable date format:
• DD/MM/YYYY, for example: 17/09/2008 (also called Europe)
• MM/DD/YYYY, for example: 9/17/2008 (also called US)
• YYYY-MM-DD, for example: 2008-09-17 (ISO 8601)
• MMM DD YYYY, for example: Sep 17 2008
• DD MMM YY, for example: 17 Sep 08
• DD.MM.YYYY, for example: 17.09.2008
• DD-MM-YYYY, for example: 17-09-2008
5 Press "Select" to save the setting.
9.3.5 Phone Lock settings
Activate the Automatic Key lock
1 Select “Locks”.
2 Select "Automatic key lock".
3 Select "On" for activation of automatic key lock.
Note: It is possible to answer/end an incoming call while the keypad is locked. If
configured in the PDM/IMS2, it is also possible to call an emergency call while the keypad
is locked. See Configuration Manual, Ascom d41 DECT Handset, TD 92641GB.
Activate the Phone Lock
The handset can be protected for unauthorized use. If this function is activated, a PIN code
has to be entered at power on, or when the handset is placed in a charger - this behaviour
will first be activated when the handset is placed in the charger. The default phone lock
code (0000) can be changed to any 4-8 digit personalized code.
Note: If configured in the PDM/IMS2, it is possible to call an emergency call while the
handset is locked. See Configuration Manual, Ascom d41 DECT Handset, TD 92641GB.
To Next Page
Loading...
