Basic operating information
The Eurit 22 allows you to define up to three users on the same telephone. For instance, if you
use the phone in your own home, you can define one user “Mother”, a second “Father” and a
third “Daughter/Son’,
or in an office
environment one user
“Company”, a second “Sales reps”
and a third
‘Private”.
By pressing
@
you can change from one user to the next and the display
indicates the symbol for the current user (A, B,
C).
a
Please refer to the Section
"Basic
Settings” for details of the procedure for defining
several users.
Once you have defined the individual settings for the different users (see “Basic Settings”), your
Eurit 22 handles a whole range of functions differently dependent on the selected user:
Each time a call is made, the number of the active user is displayed on the telephone of the
called person, and incoming calls are stored in the “missed calls” list of the appropriate user. Call
charges are calculated and billed separately for each user. Calls can be separately forwarded
(diverted) for each user depending on their requirements, etc.
Your Eurit 22 is easy to use because for many functions you are guided via menus. Entries in the
directory (and subsequent changes to these), settings and programming of your telephone are all
done using menus.
For the rapid selection of menus or sub-menus, simply press
@
once. Subsequently press
m
as often as necessary until the required menu/sub-menu is displayed. Confirm selection of the
displayed menu by pressing
El.
To jump back to the previous menu level press
@I.
To return to the main menu press
@.
6
A diagram showing the
complete
menu structure of your Eurit 22 is given in the Section
“lmportan
t information
I’.
e
Various telephone functions are available both when on-hook
and
during a call, and
these can be called up by pressing El.
The display shows what inputs are required and the current state of your telephone using a text
line and additional symbols.
You can follow queries and changes on the display.