5200 Series Programming Instructions
7
80-9352-0022-020 Rev 2 06/23
Copyright © 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
B. View Operator Status.
Click the Status icon on the 5200 Series Operator
homepage to quickly access important information
about the operator. (Figure 18)
NOTE: If door setup has not been completed, “Door
Setup Needed” will be displayed next to System Errors
on the Operator Status screen.
Enter IP:
192.168.1.1
3. Access the Product Website.
To access the website manually:
‒ From the smart device’s web browser, enter
192.168.1.1 into address bar. (Figure 16)
To access the website using the Smart Device’s
camera:
‒ Use the camera application on your smart device
to scan the Product Website QR Code located on
the switch end cap of the operator. (Figure 15)
The 5200 Series Operator homepage will be displayed.
(Figure 17)
Once the 5200 Series Operator homepage is displayed,
the connection has been successfully established.
On the Operator homepage, icons are available for quick
access to each application page.
Figure 15
Figure 16
Operator Setup via Wi-Fi (cont.):
Figure 17
Figure 18
IP Address &
Product Website
QR Code
To Next Page
Loading...
