Instructions for Installation of
Keypad Rim & Mortise Exit Devices
KP8877 / KP8878
KP8977 / KP8978
Chain Programming of the KP8800 and KP8900 Series Exit Device (including 12-)
When programming multiple User Numbers and Codes into the Keypad Exit Device, it is not necessary to leave and re-enter
the programming Mode (50) for each entry. Multiple entries may be chained together and the three different types ofuser
codes (Standard, Passage and One time) may be mixed.
The format to be used is as follows where:
“T” is the Type of user code with “1” Standard, “2” Passage and “3” One Time.
“UN_” is User Number (04-99).
“UC_” is User Code (2 to 6 digits) which correlates with user Number.
99# Master or Supervisor Code* 50# Type# User Number a# User Code a* User Code a* T# UNb# UCb* UCb*
T# UNc# UCc* UCc* ……T# UN_# UC_* UC_**
An example with four user codes is shown below:
Using Master Code 4732 and above information, the keypad exit device would be programmed as follows:99# 4732* 50#
1# 05# 875* 875* 3# 12# 2226* 2226* 2# 08# 5444* 5444* 1# 50# 3367* 3367**
If all user codes are the same type, it is not necessary to enter the type number with each entry. The type number only
hasto be entered with the first user code. The format now simplifies to:
99# Master or Supervisor Code* 50# Type# User Number a# User Code a* User Code a* UNb# UCb* UCb*
UNc# UCc* UCc* ……UN_# UC_* UC_**
An example with three user codes is shown below:
Using Master Code 45988 and above information, the keypad exit device would be programmed as follows:
99# 45988* 50# 1# 07# 77* 77* 15# 67832* 67832* 91# 7568* 7568**
To chain the User Number delete procedure:
99# Master Code* User Number a#** UNb#** UNc#** ……UN_#***
Using the information from the above example:
99# 45988* 07#** 15#** 91#***
Type User Number User Code
1 05 875
3 12 2226
2 08 5444
1 50 3367
Type User Number User Code
1 07 77
1 15 67832
1 91 7568
Programming Instructions
9
Copyright © 2014. 2021, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
02/28/21
24 A7137D • 800-810-WIRE (9473) • www.sargentlock.com
To Next Page
Loading...
