Instructions for Installation of
Keypad Rim & Mortise Exit Devices
KP8877 / KP8878
KP8977 / KP8978
Specifications
4
General Description
3
Features
5
• Operates utilizing any two to six digits
per code. Digits may be repeated and
codes may start with zero
• Adjustable unlock time
• Entry of three wrong User Codes
disables all codes for ten seconds.
Green LED flashes.
• Piezo horn can be heard with each
keystroke or turned off by Master or
Supervisory Code
• Last 15 transactions can be output to
printer via Data Transfer Device (DTD)
• 99 users total: (1) Master Code, (1)
Emergency Code, (1) Supervisory
Code, with the rest being standard
codes, passage codes, or one time
only codes
The SARGENT Keypad Operated Rim Exit Device is designed for areas which require standalone
authorized entry. It is a self-contained microprocessor-controlled keypad with non-volatile memory.
The keypad will hold a total of 99 different User Codes. User Codes “01” and “03” are utilized for
Master Code and Supervisory Code, respectively. All programming is done at the keypad, with over
1,100,000 possible user combinations.
This lock is operated by four (4) “C” batteries with a life span of approximately 40,000 cycles.
• Non-volatile memory
• Motor driven, battery-operated ET lock
• Battery operated with (4) each “C” Alkaline
• Typical 40,000 operations per set of batteries
• Low battery alert – 4 chirps after code entry
• Option Code available to sound horn every
time keypad is pressed
• External remote “request to enter” connector
requires wire harness (52-2071)
• All programming done at keypad
• Green LED indicates unlocked.Yellow LED
indicates unit is in programming mode
• Flashing green and yellow LED’s indicate
deadbolt thrown or lock set in passage mode
• Infrared LED for transaction output
Provides last 15 valid codes
• Latchbolt 3/4" (19mm) projection
• Cylinder override use 34 rim cylinder, 8877; 46 mortise cylinder, 8977
• Includes code to activate horn when keypad buttons are pushed
• Rim exit devices are non handed; mortise exits are handed
Copyright © 2014. 2021, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.
Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.
02/28/21
4 A7137D • 800-810-WIRE (9473) • www.sargentlock.com