13
2.2 I User interface presentaon
Icon Name Icon Name
Defrost Parameters menu
Temperature seng Temperature unit
Setpoint and water inlet
temperature
Clock
Speed compressor Timer programming
Fan speed Keypad lock
Inlet water temperature Programming On/O
2.2.1 Mode details
Icon Name Descripon
Cooling Mode (Smart mode)
Inverter
Automac compressor speed adaptaon from minimum to
maximum speed, cooling mode only
Heang Mode (Smart
mode)
Inverter
Automac compressor speed adaptaon from minimum to
maximum speed, heang mode only
Automac Mode (Smart
mode)
Inverter
Automac compressor speed adaptaon from minimum to
maximum speed, heang and cooling mode
Heang mode boost Boost mode at maximum compressor speed
Cooling mode boost Boost mode at maximum compressor speed
EN