27
The parameters that can be modied are listed in the following table.
Code Name Range Default
L0
Heang priority
0 : Heang priority output acve (P1P2 powered)
1: Heang priority acvated
1
L1
Period between 2
ltraon pump starts
Filtraon pump works 5 min per L1 min (L1 range :
3 - 180) to check if heang is needed
120
L2
Timer seng
0 : mer funcon OFF
1 : mer funcon ON
1
L3
Power OFF remember
funcon
0 : OFF
1 : ON
1
L4
Background light
seng
0 : No background light
1 : light ON constantly
2 : light ON if operang, light OFF if no operaon
2
L5
Unit operaon mode
0 : Heang only
1 : Cooling only
2 : Heang & Cooling
3 Cooling / Heang / Auto / Quick Heang /
Ecosilence / Heang mode / Quick Cooling /
Ecosilence / Cooling mode
3
4.6 I Wiring diagrams
See the wiring diagrams at the end of this document.
EN