4-36 Chapter 4: BIOS setup
CPU FAN Control [Duty Cycle Mode]
Allows you to select the fan control mode.
you set the CPU FAN Control item to [Duty Cycle Mode].
CHASSIS FAN Control [Duty Cycle Mode]
Allows you to select the fan control mode.
you set the CHASSIS FAN Control item to [Duty Cycle Mode].
CHASSIS FAN Q-Fan Sense [CPU Temperature]
Allows the Q-Fan to sense the CPU/MB temperature and to adjust the fan
CHASSIS FAN
Control item to [Q-FAN Mode].
OPT FAN1/2/3 Control [Duty Cycle Mode]
Allows you to select the fan control mode.
you set the OPT FAN1/2/3 Control item to [Duty Cycle Mode].
OPT Fan1/2/3 Target Temperature [40ºC/104ºF]
Allows the Q-Fan to sense the temperature of fans connected to OPT
when the OPT FAN1/2/3 Control items are set to [Q-FAN Mode].
[15ºC/59ºF] [20ºC/68ºF] [25ºC/77ºF]
[30ºC/86ºF] [35ºC/95ºF] [40ºC/104ºF] [45ºC/113ºF] [50ºC/122ºF] [55ºC/131ºF]
[60ºC/140ºF] [65ºC/149ºF] [70ºC/158ºF] [75ºC/167ºF] [80ºC/176ºF]
[85ºC/185ºF]
You need to connect the thermal sensor cables to the OPT_TEMP1/2/3
connectors to enable this function.
To Next Page
