EasyManua.ls Logo

Asus E3746 - Boot Settings Configuration

Asus E3746
196 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ROG Striker II Extreme / Striker II NSE 4-39
4.7.5 Boot Settings Conguration
Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the
chassis open status. Refer to section “2.8.2 Internal connectors” for setting details.

Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When Enabled, the
system skips certain tests while booting.

Boot Up Floppy Seek [Disabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the

Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.

Typematic Rate Setting [Disabled]

Rate (Chars/Sec) and the Typematic Delay (Msec).

The following two items Typematic Rate (Chars/Sec) and Typematic Delay
(Msec) Typematic Rate Setting is enabled.
Typematic Rate (Chars/Sec) [6]
Allows you to select the rate at which a character repeats when you hold a key.

Select Menu
Item Specic Help
Press [Enter] to
enable or disable.
Phoenix-AwardBIOS CMOS Setup Utility
Main Extreme Tweaker Advanced Power Boot Tools Exit
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Boot Settings Conguration
Case Open Warning [Enabled]
Quick Boot [Enabled]
Boot Up Floppy Seek [Disabled]
Bootup Num-Lock [On]
Typematic Rate Setting [Disabled]
x Typematic Rate (Chars/Sec) 6
x Typematic Delay (Msec) 250
OS Select For DRAM > 64MB [Non-OS2]
Full Screen LOGO [Enabled]
BIOS Wallpaper [00%]
Halt On [All Errors]

Table of Contents