ROG Striker II Extreme / Striker II NSE 4-17
CPU PLL Voltage [Auto]
condition. When you set the CPU LED item to [PLL Volt], the onboard CPU LED
[2.90V] [2.92V] [2.94V] [2.96V] [2.98V] [3.00V]
CPU VTT Voltage [Auto]
indicates voltage condition. When you set the NB LED Selection item to
[VTT Volt], the onboard northbridge LED displays northbridge voltage condition.
[2.44V] [2.46V]
Memory Voltage [Auto]
corresponds to the onboard memory LED color, both of which indicate voltage
[3.02V] [3.04V] [3.06V] [3.08V] [3.10V]
NB Core Voltage [Auto]
indicates voltage condition. When you set the NB LED Selection item to [NB Volt],
the onboard northbridge LED displays northbridge voltage condition. Refer to page
[3.08V] [3.10V]
SB Core Voltage [Auto]
1.5V SB Voltage [Auto]
Allows you to select the southbridge 1.5V voltage.
To Next Page
Loading...
