Asus RS720Q-E9-RS8 - Event Logs Menu

Chapter 5: BIOS Setup
5-36
P0 TotalTimeThreshold Low [23]
TheHWswitchingmechanismDISABLEStheperformancesetting(0)whenthetotal
P0 time is less than the threshold set.
Congurationoptions:[0]-[99]
P0 TotalTimeThreshold High [3a]
TheHWswitchingmechanismEnablestheperformancesetting(0)whenthetotalP0
time is greater than the threshold set.
Congurationoptions:[0]-[99]
Enabling/Disabling Options
Smbios Event Log [Enabled]
ChangethistoenableordisableallfeaturesofSmbiosEventLoggingduringboot.
Congurationoptions:[Disabled][Enabled]
Erasing Settings
Erase Event Log [No]
ChooseoptionsforerasingSmbiosEventLog.Erasingisdonepriortoanyloggingactivation
during reset.
Congurationoptions:[No][Yes,Nextreset][Yes,Everyreset]
5.7.2 View Smbios Event Log
Press <Enter> to view all smbios event logs.
5.7 Event Logs menu
5.7.1 Change Smbios Event Log Settings
Press<Enter>tochangetheSmbiosEventLogconguration.
Allvalueschangedheredonottakeeffectuntilcomputerisrestarted.