96
Smart call blocker
Call block settings
3. Press MENU/SELECT to select Record name. The system announces,
“Record after the tone. Press 5 when you are done.”
4. Speak towards the handset to record your name. Press 5 to end recording.
The announcement with your recorded name plays.
To listen to the announcement with your recorded name again, scroll to Play
annc and press
MENU/SELECT.
To reset your screening announcement:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/
SELECT to enter the main menu when the handset is not in
use. Press T
CID or SDIR to scroll to Call block, then press MENU/SELECT.
2. Press T
CID or SDIR to scroll to Screening annc, then
press
MENU/SELECT.
3. Press T
CID or SDIR to scroll to Reset annc, then press
MENU/SELECT. The screen shows Reset to default
annc?. Press
MENU/SELECT´º´¼ÁǶÂÁèÅÀ»¸
screen shows Annc. reset to default before returning
to the previous menu.
-OR-
Press T
CID or SDIR to scroll to Play annc, then press
MENU/SELECT. While the announcement is playing,
press
MUTE/DELETE to delete the announcement. The
screen shows Annc. Deleted before returning to the
previous menu.
Your name will be deleted from the screening announcement, and the
telephone will use the default screening announcement described on page
98.
Allow list
>Screening annc
Play annc
>Reset annc
To Next Page
Loading...
