Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
1. When your device shows Press and hold [PTT] to talk, press
MENU/SELECT. The screen shows Intercom.
2. Press
MENU/SELECT. Your device displays Calling BASE 0 or
Calling HANDSET X»¸·¸ÆǼÁ´Ç¼ÂÁ·¸É¼¶¸µÅ¼¸ëÌÆ»ÂÊÆPush to
talk Ended and then HANDSET X is calling or BASE 0 is calling. The
destination device rings.
3. Press
PHONE/FLASH or any dialing keys (0-9,
#
or TONE ) on the
destination handset, or press
/SPEAKER or any dialing keys (0-9,
#
or
TONE
) on the telephone base to answer the intercom call. Both devices
now show Intercom.
4. To end the intercom call, press
OFF/CANCEL on your handset or place
the handset in the telephone base or charger, or press CANCEL on the
telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
f During a one-to-one PTT, press
PHONE/FLASH on the initiating or
destination handset. The PTT call ends automatically and the outside call
is answered.
f During a one-to-group PTT call, press
PHONE/FLASH on the initiating
handset or
/SPEAKER on the initiating telephone base. The PTT call
ends automatically and the outside call is answered.
f During a one-to-group PTT call, press
PHONE/FLASH on any one of the
destination handsets, or press
/SPEAKER on the destination telephone
base. That device answers the outside call. The PTT call continues for the
rest of the PTT participants.
f To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base. The
telephone continues to ring.
61
To Next Page
Loading...
