AT&T CL83107 - Ringer Volume; Ringer Tone

30
Telephone settings
Telephone base settings
Ringer volume
²ÂÈ¶´ÁƸÇÇ»¸żÁº¸ÅÉ¿ÈÀ¸¿¸É¸¿ÇÂÂÁ¸¹ƼË¿¸É¸¿ÆÂÅÇÈÅÁÇ»¸żÁº¸ÅÂæ
°»¸ÁÇ»¸żÁº¸Å¼ÆÂæ appears on the screen.
1. Press MENU/SELECT in idle mode to enter the main
menu.
2. Use
TCID or SDIR to scroll to Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume.
4. Press
TCID or SDIR to sample each volume level.
5. Press
MENU/SELECT to save your preference. There is a
¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸ÁŸÇÈÅÁÆÇÂÇ»¸ßɼÂÈÆ
menu.
Notes:
f The telephone base ringer volume also determines the ringer volume for intercom calls.
f If the ringer volume is set to off, the telephone base is silenced for all incoming calls.
f If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly display Caller ID won’t be
announced.
Ringer tone
You can choose one of ten ringer tones.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use
TCID or SDIR to scroll to Ringers, then press
MENU/SELECT.
3. Press TCID or SDIR to scroll to Ringer tone, then
press
MENU/SELECT.
4. Press TCID or SDIR to sample each ringer tone.
5. Press
MENU/SELECT to save your preference. There is a confirmation tone
and the screen returns to the previous menu.
Note: If you turn off the ringer volume, you will not hear ringer tone samples.
> Ringer tone
Ringer volume
S

T
RINGER TONE
> Tone 1
S

T
> Ringer volume
RINGER VOLUME
S

T
Ringer tone
S

T