AT&T CL83107 - Set Date;Time

31
Telephone settings
Telephone base settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
¹Ç»¸ʸ¸¾¶´Áµ¸¶´¿¶È¿´Ç¸·¹ÅÂÀÇ»¸¶´¿¿¸Å¢¼Á¹ÂÅÀ´Ç¼ÂÁ²ÂÈ¶´ÁÇÈÅÁÂæ
the date and time settings of the caller ID service and set the date and time
manually (see Use caller ID to automatically set date and time on page 40).
ì¸Å´ÃÂʸÅ¹´¼¿ÈŸÇ»¸ÆÌÆǸÀÃÅÂÀÃÇÆÌÂÈÇÂƸÇÇ»¸·´Ç¸´Á·ǼÀ¸
To set the date and time manually:
1. When the telephone base is in idle mode, press MENU/
SELECT to enter the
main menu.
2. Press
TCID or SDIR to scroll to Set date/time and
then press
MENU/SELECT.
3. Press
TCID or SDIR to select the month, then press
MENU/SELECT, or enter the number using the
dialing keys.
4. Press
TCID or SDIR to select the day, then press
MENU/SELECT, or enter the number using the
dialing keys.
5. Press
TCID or SDIR to select the year, or enter the
number using the dialing keys, then press
MENU/SELECT to move on to set the time.
6. Press
TCID or SDIR to select the hour, then press
MENU/SELECT, or enter the number using the dialing
keys.
7. Press TCID or SDIR to select the minute, then press MENU/SELECT, or
enter the number using the dialing keys.
8. Press
TCID or SDIR to highlight AM or PM, or press 2 for AM or 7 for PM.
Press
MENU/SELECTÇÂ¶ÂÁèÅÀ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸
screen returns to the previous menu.
Notes: If the clock is not set when a message is recorded, the system announces, “Time and day not set,”
before it plays the message.
SET DATE
MM/DD/YY
S

T
SET TIME
HH:MM --
S

T
Ringers
>Set date/time
S

T