33
Telephone settings
Telephone base settings
Caller ID announce
The caller ID announce feature lets you know who’s calling without having
to look at the display. When you have an incoming call, the handset and/or
base speaks “Call from...” and the name of the caller based on the directory
or caller ID information. If the caller’s name is private or unknown, the phone
number up to the last 11 digits will be announced. If the caller’s phone number
is also private or unknown, no information will be announced. The default
setting is On.
ÂÇÈÅÁÂÁÂÅÂæÇ»¸¶´¿¿¸Å¢´ÁÁÂÈÁ¶¸¹¸´ÇÈŸ
1. Press MENU/
SELECT in idle mode to enter the
main menu.
2. Use TCID or SDIR to scroll to Settings, then press
MENU/SELECT.
3. Use
TCID or SDIR to scroll to Caller ID annc, then
press
MENU/SELECT.
4. Use
TCID or SDIR to highlight the desired option, then
press
MENU/SELECT.
f ¬¸Ç´¿¿¨Á¨æ - Change the setting for the base and all handsets.
f Base - Change the setting for the telephone base only.
5. Use
TCID or SDIR to highlight On or Off, then press MENU/SELECT. There
is a confirmation tone and the screen returns to the previous menu. If you
change the setting to Set all On/Off, the screen shows CID Annc ON/OFF
on all HS & BS.
Notes:
f To use the caller ID announce feature, you must subscribe to caller ID service from your telephone service provider.
f If you have paired an AT&T TL80133 DECT 6.0 cordless speakerphone to the telephone base, the caller ID announce
setting for all devices also applies to the cordless speakerphone. When the setting is On, the cordless speakerphone
speaks “Call from...” and the name of the caller based on the directory or caller ID information during an incoming call.
If the caller’s name is unavailable, the phone number up to the last 11 digits will be announced.
f This feature does not announce information for call waiting calls.
f It takes at least 2 rings for the phone to receive caller ID information and announce it. If the phone is answered before the
end of the second ring, the phone won’t have time to announce the caller’s information.
f Pronunciation of names may vary with this feature. Not all names may be pronounced correctly.
f Caller ID announce is available in English only.
BS CID ANNOUNCE
>On
S
T
LCD language
>Caller ID annc
S
T
To Next Page
Loading...
