AT&T CL83107 - Use Caller ID to Automatically Set Date and Time; Home Area Code

37
Telephone settings
Telephone base settings
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps, as mentioned below,
to turn the CID time sync¹¸´ÇÈŸÂÁÂÅÂæ»¸·¸¹´È¿ÇƸÇǼÁº¼ÆOn.
1. When the telephone is in idle mode, press
MENU/
SELECT to enter the main menu.
2. Press
TCID or SDIR to scroll to Settings, then press
MENU/SELECT.
3. Press
TCID or SDIR to scroll to CID time sync, then
press
MENU/SELECT.
4. Press
TCID or SDIR to highlight On or Off, then press
MENU/SELECT to save. There is a confirmation tone
and the screen returns to the previous menu.
Home area code
If you dial seven digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a call
from within your home area code, the caller ID log only displays the seven
digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial ten digits to make a local phone call, do not use this home area code
feature. If you do, you cannot place local calls from your caller ID log, as they
will have only seven digits.
To set the home area code:
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Use
TCID or SDIR to scroll to Settings, then press
MENU/SELECT.
3. Use
TCID or SDIR to scroll to Home area code, then
press
MENU/SELECT»¸ƶŸ¸ÁµÅ¼¸ëÌÆ»ÂÊÆ
Only for 7digit dial from CID.
4. Use the dialing keys to enter a three-digit home area
code.
f Press X/DELETE to delete a digit.
f Press and hold X/DELETE to delete all digits.
5. Press
MENU/SELECTÇÂƴɸ»¸Å¸¼Æ´¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸´Á·Ç»¸ƶŸ¸Á
shows Area code will not show in CIDµÅ¼¸ëÌµ¸¹ÂŸŸÇÈÅÁ¼ÁºÇÂÇ»¸
previous menu.
Key tone
>CID time sync
S

T
CID TIME SYNC
>On
S

T
CID time sync
>Home area code
S

T
HOME AREA CODE
___