AT&T CL83107 - Control Calls Without Numbers

Smart call blocker
Call block settings
¬¸Ç¬À´ÅÇ¶´¿¿µ¿Â¶¾¸ÅÂÁÂæ
The Smart call blocker feature is set to on by default.
1. Press CALL BLOCK on the handset when it is not in
use, and then press
MENU/SELECT to select Block
¨Á¨æ.
-OR-
Press MENU/
SELECT to enter the main menu when the
handset is not in use. Press T
CID or SDIR to scroll to
Call block, then press
MENU/SELECT twice.
2. Press T
CID or SDIR to highlight On or ¨æ, then
press
MENU/SELECT to save the setting. You hear a
¶ÂÁèÅÀ´Ç¼ÂÁÇÂÁ¸
Control calls without numbers
Use this setting to control “out of area” or “Private” calls. You can choose to
accept or reject these calls directly. You can also choose to screen them by
learning the callers’ names before you decide whether to accept or reject
these calls. Moreover, you can forward these calls to the answering system.
To change the setting:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/
SELECT to enter the main menu when the handset is not in
use. Press q
CID or pDIR to scroll to Call block, then press MENU/SELECT.

Caller ID log
>Call block

Block On/Off
>Calls w/o num
83