AT&T CL83107 - Dial Mode; Web Address

Telephone settings
Handset settings
Note: If in the future, your telephone service provider requires you to dial ten digits to make a local call (area
code plus telephone number), you need to delete your home area code and dial out locally from the call ID log.
With the home area code displayed, press and hold MUTE/DELETE until the digits are deleted, and then press
MENU/SELECT. The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Use
TCID or SDIR to scroll to Settings, then press
MENU/SELECT.
3. Use
TCID or SDIR to scroll to Dial mode, then press
MENU/SELECT.
4. Use
TCID or SDIR to highlight Touch-tone or Pulse, then
press
MENU/SELECT. The screen shows DIAL MODE is
touch-tone or DIAL MODE is pulse. There is a
confirmation tone and the screen returns to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Use
TCID or SDIR to scroll to Web address, then press
MENU/SELECT.
www.telephones.
att.com
> Web address
Settings
DIAL MODE
>Touch-tone
Home area code
>Dial mode
27