Answering system
112112
Answering system settings
Voice guide
This feature is an alternative way for you to do the basic setup of the
answering system. You can follow the voice guide to record your own
announcement, set the number of rings, and set the message alert tone.
This feature is only available in the telephone base.
1. When the telephone base is in idle mode, press MENU/
SELECT.
2. Press T
CID or SDIR to scroll to Answering sys, then
press
MENU/SELECT.
3. Press T
CID or SDIR to scroll to Voice guide, then press
MENU/SELECT.
4. You hear a voice prompt “Hello! This voice guide will
assist you with the basic setup of your answering
system.“
5. Set up your answering system by inputting the
designated numbers, as instructed in the voice guide.
Notes:
f You can press CANCEL to quit the voice guide at any time.
f If the system does not receive any input, it will play an alert message. If there is still no input, it will announce
“Sorry, I still have not received any input. If you want to restart the voice guide, please enter the menu and select
Voice guide under Answering system. Good bye.”
f After a power outage, the system prompts you to set the date and time. After the date and time setting is done or
skipped, the system will prompt if you want to set up the answering system via voice guide. Press MENU/SELECT
to start the setup.
Answer ON/OFF
>Voice guide
S
T
Setup Ans sys
...
To Next Page
Loading...
