Answering system
Answering system settings
To record a new outgoing announcement:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
SELECT to enter the
main menu.
2. Press T
CID or SDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press
MENU/SELECT again to select Announcement.
4. Press
MENU/SELECT to select Record annc. The system
announces, “Record after the tone. Press 5 when you
are done.”
5. Speak towards the handset to record your announcement.
Press 5 to end recording. Your recorded announcement plays.
To listen to the recorded announcement again, scroll to Play annc and press
MENU/SELECT.
Using the telephone base:
1. When the telephone base is in idle mode, press
MENU/
SELECT to enter the main menu.
2. Press T
CID or SDIR to scroll to Answering sys, then
press
MENU/SELECT.
3. Press
MENU/SELECT again to select Announcement.
4. Press
MENU/SELECT again to select Record annc. The system announces,
“Record after the tone. Press 5 when you are done.”
5. Speak towards the telephone base to record your announcement. Press 5
to end recording. Your recorded announcement plays.
To listen to the recorded announcement again,
scroll to Play annc and press
MENU/SELECT.
>Record annc
Play annc
Play annc
>Record annc
S
T
109
To Next Page
Loading...
