114
Smart call blocker
Call block settings
3. Press
CID or
DIR to scroll to Calls w/o num, then press
SELECT.
4. Press
CID or
DIR to scroll to one of the following options,
then press SELECT.
f Screening - ask the caller to press the pound key (#)
or to say his/her name before the call rings on your
telephone.
f Allow - allow the calls to get through and ring.
f Answering sys - forward the calls to the answering system
without ringing.
f Block - reject the calls with block announcement.
5. If you select Screening, press
CID or
DIR to choose one of
the following options, then press SELECT.
f w/ Caller name - ask the caller to say his/her name
before the call rings on your telephone. You can then
answer the call, and hear the caller’s name announced.
You can decide whether to answer or reject the call, or to
forward the call to the answering system.
f w/o Caller name - ask the caller to press the pound key (#) before the
call rings on your telephone. You can then answer the call.
Using the telephone base:
1. Press MENU on the handset in idle mode to enter the
main menu.
2. Press qCALLER ID or pDIRECTORY to scroll to Smart call
blk, then press SELECT.
3. Press qCALLER ID or pDIRECTORY to scroll to Calls w/o
num, then press SELECT.
4. Press qCALLER ID or pDIRECTORY to scroll to one of the
following options, then press SELECT.
f Screening - ask the caller to press the pound key
(#) or to say his/her name before the call rings on
your telephone.
f Allow - allow the calls to get through and ring.
SMART CALL BLK
Allow list
Star name list
Calls w/o num
SELECT
BACK
CALLS W/O NUM
Screening
All o w
Answering sys
SELECT
BACK
SCREENING
w/ Caller name
w/o Caller name
SELECT
BACK
SMART CALL BLK
Allow list
Star name list
Calls w/o num
p
q
SELECT
BACK
Answering sys
Smart call blk
Directory
Caller ID log
p
q
SELECT
BACK
CALLS W/O NUM
Screening
Allo w
Answering sys
p
q
SELECT
BACK
To Next Page
Loading...
Need help?
General
