Multiple handset use
84
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
Using a cordless handset or the telephone base:
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your
device shows:
f PTT From HANDSET X To devices: X (the rst X represents the
initiating handset number, and the second X represents your handset
number; a maximum of four handset numbers appear).
-OR-
f PTT From BASE 0 To devices: X (the X represents your handset
number; a maximum of four handset numbers appear).
3. When your speakerphone light is o (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or
PTT/FLASH on your telephone base. You will hear a chirp. Speak towards
the device.
f While you are speaking, your device shows PTT To BASE 0 or PTT To
HANDSET X (X represents the destination handset number), or PTT
To devices: X (X represents the handset numbers of one or more
destination handsets; a maximum of four handset numbers appear).
f Your voice is broadcast to all destination devices.
Aer speaking, release PUSH TO TALK on your handset or PTT/ FLASH
on your telephone base. Your device will beep. Aer the beep, if your
speakerphone light is o, you can press and hold PUSH TO TALK on your
handset or PTT/FLASH on your telephone base to continue speaking, or the
destination device can respond.
To Next Page
Loading...
Need help?
General
