AT&T CLP99287 User Manual

142
Smart call blocker
Screen calls without numbers
Send call to answering system
1. When the telephone starts ringing, and the screen displays Screened call:
f On the handset, press HOME/FLASH, CELL 1 , CELL 2 , or
/SPEAKER to pick up the call.
-OR-
f On the telephone base, press HOME, CELL 1 or CELL 2 to pick up the call.
If you have turned on the caller ID announce feature, the telephone
announces “You have a call from...” and the caller’s name. Aer you picked
up the call, the telephone announces “To answer the call, press 1. To send
this call to the answering system, press 4. To repeat these options, press *”.
2. Press 4 to send the caller to the answering system.
Notes:
f To turn on or off caller ID announce, see page 44.
f When the telephone is ringing, you can press SILENCE to mute the ringer temporarily.
f The caller is sent to the answering system and can leave a message even if the answering system is off.
End call
1. When the telephone starts ringing, and the screen displays Screened call:
f On the handset, press HOME/FLASH, CELL 1 , CELL 2 , or
/SPEAKER to pick up the call.
-OR-
f On the telephone base, press HOME, CELL 1 or CELL 2 to pick up the call.
If you have turned on the caller ID announce feature, the telephone
announces “You have a call from...” and the caller’s name. Aer you picked
up the call, the telephone announces “To answer the call, press 1. To send
this call to the answering system, press 4. To repeat these options, press *”.
2. If you do not want to take the call, press OFF/CANCEL to end the call.

AT&T CLP99287 Specifications

General

Brand	AT&T
Model	CLP99287
Category	Cordless Telephone
Language	English