129
Smart call blocker
Call block settings
Star name list
There are many organizations like schools, medical offices, and
pharmacies that use robocalls to communicate important information
to you. Robocall uses an autodialer to deliver pre-recorded messages. By
entering the name of the organizations into the star name list, it ensures
these calls will ring through when you only know the caller names but not
their numbers.
If the first 15 characters of the incoming caller ID’s name match a name
saved in your star name list, the call will get through and ring. The star
name list stores up to 10 names.
Add a star name entry:
Using a cordless handset:
1. Press MENU on the handset in idle mode to enter the main menu.
2. Press
CID or
DIR to scroll to Smart call blk, then press SELECT.
3. Press
CID or
DIR to scroll to Star name list, then press SELECT.
4. Press
CID or
DIR to scroll to Add new entry, then press SELECT.
5. When the screen displays Enter name, use the dialing keys
to enter a name (up to 15 characters). Press a key repeatedly
until the desired character appears. The rst character of
every word is capitalized.
f Press
CID or
DIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press MUTE/DELETE to erase a character.
f Press and hold MUTE/DELETE to erase all characters.
f Press TONE to change the next letter to upper or lower case.
6. Press SAVE to store your star name entry.
Using the telephone base:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press qCALLER ID or pDIRECTORY to scroll to Smart call blk, then press
SELECT.
3. Press qCALLER ID or pDIRECTORY to scroll to Star name list, then press
SELECT.
4. Press qCALLER ID or pDIRECTORY to scroll to Add new entry, then press
SELECT.
Enter name
Bayriver Eleme _
SAVE
BACKSP
To Next Page
Loading...
Need help?
General
