Answering system
154
Answering system settings
Voice guide
This feature is an alternative way for you to do the basic setup
of the answering system. You can follow the voice guide to
record your own announcement, set the number of rings, and
set the message alert tone.
Using a cordless handset:
1. When the handset is in idle mode, press MENU to enter the
main menu.
2. Press
CID or
DIR to scroll to Answering sys, then
press SELECT.
3. Press
CID or
DIR to scroll to Voice guide, then
press SELECT. You hear a voice prompt, “Hello! This voice
guide will assist you with the basic setup of your answering
system.“
4. Set up your answering system by inputting designated
numbers, as instructed in the voice guide.
Using the telephone base:
1. When the telephone base is in idle mode, press MENU
to enter the main menu.
2. Press SELECT to select Answering sys.
3. Press qCALLER ID or pDIRECTORY to scroll to
Voice guide, then press SELECT. You hear a voice
prompt, “Hello! This voice guide will assist you with the
basic setup of your answering system.“
4. Set up your answering system by inputting designated
numbers, as instructed in the voice guide.
Notes:
f You can press OFF/CANCEL on the handset or press CANCEL on the telephone
base to quit the voice guide at any time.
f If the system does not receive any input, it will play an alert message. If there is still no input, it will announce “Sorry, I
still have not received any input. If you want to restart the voice guide, please enter the menu and select Voice guide under
Answering system. Good bye.”
f After a power outage, the system prompts you to set the date and time, and Smart call blocker. After that, the system
prompts if you want to set up the answering system via voice guide. Press YES to start the setup.
SELECT
Play messages
Answering sys
Smart call blk
Directory
BACK
SELECT
ANSWERING SYS
Record memo
Answer On/Off
Voice guide
BACK
Setting up
Answering
system...
ANSWERING SYS
Record memo
Answer ON/OFF
Voice guide
p
q
SELECT
BACK
Setting up
Answering
system...
Answering sys
Smart call blk
Directory
Caller ID log
p
q
SELECT
BACK
To Next Page
Loading...
Need help?
General
