AT&T CLP99287 - Telephone Operation; Call Management Basics

47
Telephone settings
Handset and telephone base settings
Key tone
The handset is set to beep with each key press. You can adjust the key tone
volume or turn it o. If you turn o the key tone, there are no beeps when
you press keys.
1. Press MENU in idle mode to enter the main menu.
2. Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Settings,
then press SELECT.
3. Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Key tone,
then press SELECT.
4. Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to select the desired
volume or O.
5. Press SET to save your preference. There is a conrmation
tone and the screen returns to the previous menu.
p
q
KEY
TONE
SET
BACK
BACK
SET
KEY TONE
SETTINGS
Voicemail #
Clear voicemail
Key tone
SELECT
BACK
p
q
SETTINGS
Voicemail #
Clear voicemail
Key tone
SELECT
BACK