Multiple handset use
85
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
Using a cordless handset or the telephone base:
1. When your device shows Press and hold [PTT] to talk, press INTCOM.
The screen shows Switch to Intercom?.
2. Press SELECT. Your device displays Calling BASE 0 or
Calling HANDSET X. The destination device briey shows Push to
talk Ended and then HANDSET X is calling or BASE 0 is calling. The
destination device rings.
3. Press HOME/FLASH or any dialing keys (0-9, or TONE ) on the
destination handset, or press HOME or any dialing keys (0-9, or
TONE ) on the telephone base to answer the intercom call. Both
devices now show Intercom.
4. To end the intercom call, press OFF/CANCEL on your handset or place the
handset in the telephone base or charger, or press END on the handset or
telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
Using a cordless handset or the telephone base:
f During a one-to-one PTT call, press HOME/FLASH, CELL 1 or CELL 2
on the initiating or destination handset, or press HOME, CELL 1 or CELL 2 on
the telephone base. The PTT call ends automatically and the outside call is
answered.
f During a one-to-group PTT call, press HOME/FLASH, CELL 1 or
CELL 2 on the initiating handset, or press HOME, CELL 1 or CELL 2 on the
telephone base. The PTT call ends automatically and the outside call
is answered.
f During a one-to-group PTT call, press HOME/FLASH, CELL 1 or
CELL 2 on any one of the destination handsets, or press HOME,
CELL 1 or CELL 2 on the telephone base. That device answers the outside
call. The PTT call continues for the rest of the PTT participants.
f To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base. The
telephone continues to ring.
To Next Page
Loading...
Need help?
General
