Telephone operation
56
Make, answer and end a call
Make, answer or end a cell call
The CLP99287/CLP99387/CLP99457/CLP99487/CLP99547/CLP99557/
CLP99587 can be used to make or answer calls on the cell line. You can
connect a maximum of 4 Bluetooth enabled cell phones to the telephone
base. Both cell phones can be used on cell calls at the same time.
Using a cordless handset:
To make a cell call:
f Press CELL 1 or CELL 2 . Enter the telephone number, then press DIAL.
To predial a cell call:
f Enter the telephone number, then press CELL 1 or CELL 2 .
To answer a cell call:
f Press HOME/FLASH or /SPEAKER, CELL 1 , CELL 2 or any dialing key
(0-9 or TONE ).
To end a cell call:
Press OFF/CANCEL, or put the handset in the telephone base or charger.
Using the telephone base:
To make a cell call:
1. Press CELL 1 or CELL 2, then enter the telephone number.
2. Press DIAL.
To predial a cell call:
f Enter the telephone number, then press CELL 1 or CELL 2.
To answer a cell call:
f Press HOME, CELL 1, CELL 2 or any dialing key (0-9 or TONE ).
To end a cell call:
f Press CELL 1 or CELL 2.
Notes:
f You can also use your cell phone to answer the call. If you answer with your cell phone, it disconnects from the
telephone base.
f If you do not want to answer the call, press REJECT.
f When you try to make a cell call but your cell phone is not connected to the base, the telephone base displays Cellular
phone not connected. Please connect to proceed.. Press CONNECT to connect your cell phone to the telephone
system. Refer to Bluetooth connection from idle mode on page 27 and Connect/disconnect an active device
on page 28.
To Next Page
Loading...
Need help?
General
