AT&T CLP99287 User Manual

Telephone settings
50
Handset and telephone base settings
Cell area code
Most cell phone entries are stored in a 10-digit format. If all of your cell phone
entries are stored this way, you do not need to program your cell
area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly using your home line.
To set the cell area code:
1. Press MENU in idle mode to enter the main menu.
2. Press

CID or

DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to
highlight Directory, then press SELECT .
3. Press

CID or

DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base
to highlight the desired downloaded directory, then
press OPTION.
4. Press

CID or

DIR on the handset to scroll to
Cell areacode, then press SELECT. The screen briey
shows Only for 7 digit dial from CID.
-OR-
Press qCALLER ID or pDIRECTORY on the telephone base to scroll to Cell
area code, then press SELECT. The screen briey shows Only for 7 digits
dialing from Caller ID log.
5. Use the dialing keys to enter the desired cell area code.
f Press MUTE/DELETE on the handset, or X/DELETE on the telephone
base to erase a digit.
f Press and hold MUTE/DELETE on the handset, or X/DELETE on the
telephone base to erase all digits.
6. Press SAVE to conrm. There is a conrmation tone. The handset screen
shows Areacode will not show in CID and the telephone base screen
shows Area code will not show in Caller ID log briey before returning to
the previous menu.
CELL AREA CODE
---
SAVE
BACKSP
CELL AREACODE
---
SAVE
BACKSP

AT&T CLP99287 Specifications

General

Brand	AT&T
Model	CLP99287
Category	Cordless Telephone
Language	English