Multiple handset use
77
Call transfer using intercom
Use the intercom feature to transfer an outside call to another system
handset or the telephone base. You can also share an outside call with
another system handset or the telephone base.
To transfer or share an outside call using intercom:
Using a cordless handset:
1. During the call, press OPTION.
2. Press
CID or
DIR to scroll to Intercom, then press SELECT.
f If you have one handset and no other registered devices,
the handset shows Calling base.
f If you have other registered device(s) or more than one
handset, the handset shows INTERCOM TO:. Use the
dialing keys to enter a specific device number (0 for
the telephone base, 1-9 for handsets 1-9, # for a single
headset/speakerphone, # followed by 1 or 2 for headset/
speakerphone 1 or 2, or TONE followed by 0-2 for
handsets 10-12, or TONE followed by
#
for all devices), or press
CID or
DIR to scroll to the desired device and press SELECT.
The call is automatically put on hold. Your handset screen shows Calling
HANDSET X, Calling BASE 0 or Calling all. The destination device rings
and displays HANDSET X is calling, or HANDSET X is calling all.
3. To answer the intercom call on the other device, press HOME/FLASH,
/SPEAKER, CELL 1 , CELL 2 or any dialing key (0-9, TONE ) on the
destination handset, or press HOME on the telephone base.
4. From this intercom call, you have the following options:
f You can transfer the call. Press OPTION and then press
SELECT to select Transfer on the calling handset.
Your screen shows Call transferred. The other device
automatically connects to the outside call.
f You can let the other device join you on the outside call in
a three-way conversation. Press OPTION. Press
CID or
DIR to highlight Share call, then press SELECT.
f You can end the intercom call and continue the outside call with your
handset. Press OFF/CANCEL, END, HOME/FLASH, CELL 1 or CELL 2
on your handset (the ended intercom call party hears four beeps).
Notes:
f If you want to cancel an intercom call and reconnect to the outside call before the destination handset answers,
press OFF/CANCEL on the originating handset.
f If the called device is not answered within 100 seconds, or if the device is in use, on a call or out of range, the
initiating device shows No answer. Try again..
BACK
SELECT
INTERCOM TO:
BASE 0
HANDSET 2
All
CK
S
SELECT
Hold
Intercom
Equalizer
B
Caller ID log
BACK
SELECT
Tran s fe r
Share call
BACK
To Next Page
Loading...
Need help?
General
